|
  
|
Design and inspection of a hydraulic scissor lift platform
with a vertical travel of 8.m to carry a working load of 25 tons.
|
|
Design and inspection of structural engineering
content of a factory development of two adjacent structures including soil survey
and interpretation. The shops and offices were supported on a rafted foundation
with a Reinforced Concrete basement and the factory on piles with caps and ground
beams. Both superstructures were steel framed with prestressed concrete floors
and a profiled sheet roof.
|
|
Design and supervision of structural engineering content
for the alteration, refurbishment and extension into the adjoining property and
at the rear. The structure included removing two boundary walls at ground floor,
design temporary pinning of the 4 storeys over introducing framing to give a
clear opening, extending the basement and alterations to the facade.
|
|
Design and inspection of engineering content for the erection of two competition
courts and one display court with spectator seating including gym facilities and
assembly room. The structure consisting of loadbearing walls and precast slabs
and insitu terracing with a flat roof on preformed steel trusses.
|
|
Design and inspection of engineering content for the removal of trusses and
erection of tapered beams to increase storey height to accommodate increased
services.
|
|
Design and inspection of engineering content for the repairs and refurbishment of
a 400 year old building damaged by fire. The work included survey, report,
strengthening of floors, introduction of a new stair, roof repairs and loft
extension.
|
|
Design and supervision of building structures on 15 sites. The design included
new buildings on existing sites and refurbishment of existing structures.
|
|
